Need advice on the right pump for your application? Call the team on 01773 533 283.

Talk to us today: +44 (0) 1773 533 283

My Enquiry List: 0 itemsView list

     
  • Fast track icon

    MODELS AVAILABLE FROM STOCK Shorter lead times. Your deadlines met.

  • lightbulb icon

    APPLICATION EXPERIENCE YOU CAN RELY ON We'll specify the ideal solution for your process.

  • Piggy Bank Image Icon

    LOWER TOTAL LIFETIME COST SOLUTIONS Efficient, easy to maintain & long life design.

Fuel Oil Handling for Engineering Company - Long Coupled Centrifugal Pumps


Customer: Engineering & Construction Company 

Engineering & Construction

Location: 230MW Thermal Power Plant inGhana

Equipment supplied

3 Qty Horizontal Long Coupled End Suction Process Centrifugal Pump w/ Explosion Proof Motor & Baseplate

  • Service: Fuel Oil Forwarding Pumps
  • Fluids: Fuel Oil
  • Operating Temp: up to +60ºC
  • Capacity: 37.6 m³/hr @ 7 Bar
  • Motor: 22 kW / 230-400-III / 50 Hz / 2950 rpm / II 2G EExd IIB T4
  • Pump casing: Cast Steel GSC 25
  • Impeller: Stainless Steel AISI 304
  • Shaft: Stainless Steel AISI 420
  • Sealing: Mechanical - M3 SBVGG
  • Suction / Discharge: DN 65 - PN16 / DN 50 - PN16

2 Qty Horizontal Long Coupled End Suction Process Centrifugal Pump w/ Explosion Proof Motor & Baseplate

  • Service: Fuel Oil Pumps
  • Fluids: Fuel Oil
  • Operating Temp: up to +60ºC
  • Capacity: 20 m³/hr @ 2.5 Bar
  • Motor: 3 kW / 230-400-III / 50 Hz / 2950 rpm / II 2G EExd IIB T4
  • Pump casing: Cast Steel GSC 25
  • Impeller: Stainless Steel AISI 304
  • Shaft: Stainless Steel AISI 420
  • Sealing: Mechanical - M3 SBVGG
  • Suction / Discharge: DN 65 - PN16 / DN 40 - PN16

2 Qty Horizontal Long Coupled Peripheral Pump w/ Explosion Proof Motor & Custom Baseplate 

Long coupled peripheral pump

  • Service: Fuel Oil Filling Pumps
  • Fluid: Fuel Oil
  • Temperature: up to 60ºC
  • Capacity: 1.8 m³/hr @ 1.5 Bar
  • Motor: 0.25 kW / 230-400-III / 50 Hz / 2900 rpm / EEx de IIB T4
  • Pump casing: Cast Iron
  • Impeller: Brass
  • Shaft: St. Steel AISI 316
  • Sealing: Mechanical Seal
  • Connections: 1" BSP T

Enquiry

The client had previously used Castle Pumps Ltd for a simpler supply of some end suction centrifugal pumps for a previous project. They now wanted to re-use our competitive range of industrial pumps but also tasked us with the selection and supply of some affiliated equipment: this incudded an 8” Carbon Steel Strainer Assembly, a bespoke ATEX Rated self-priming fuel oil filling pump package and an automatic recirculation valve on top of a variety of Cast Steel, ATEX Rated Fuel Oil pumps. Castle Pumps took on the challenge and were only too happy to oblige!

Solution

We offered and subsequently supplied all the required pumps from our SNT End Suction Centrifugal Pump range which feature a back pull-out design and are EN733 compliant, as well as all the affiliated equipment under 1 supply, reducing the clients leg work as well as multiple supplier payments and shipment costs. We consolidated the order into 1 shipment, packaged everything for export (ISPM 15 Standard), prepared all the necessary export documentation and shipped to the client’s nominated delivery port, hassle free!

Castle Pumps also provided the customer with

auto recirculation valve

1 Qty Automatic Recirculation Valve 

  • Inlet / Outlet: DN80 / PN40 (DIN EN 1092-1)
  • Bypass: DN40 / PN40 (DIN EN 1092-1)
  • Housing: Cast Steel 1.0619
  • Internals: Stainless Steel (Cr > 13%)
  • Seals: FKM-1

1 Qty 8" ANSI 150# RF Duplex Strainer w/ Tappings & Plugs for Drain & Vent on each basket and lid

  • Body Material: Carbon Steel BS3100 Gr.A2  ANSI 150 duplex strainer
  • Connection Size: 8" ANSI 150 flanges
  • Drain Ports: ½" NPT
  • Seal Material: Viton-A
  • Diverter Plug: Bronze
  • Baskets: 30 Mesh (567 Micron)

Castle Pumps are fully accredited to enable you to buy with confidence. Our accreditation includes: Our accreditation A division of the CTS Group, Part of Flow Max Ltd.