Talk to us today: +44 (0) 1773 533 283

My Enquiry List: 0 itemsView list

     
  • MODELS AVAILABLE FROM STOCK Shorter lead times. Your deadlines met.

  • APPLICATION EXPERIENCE YOU CAN RELY ON We'll specify the ideal solution for your process.

  • LOWER TOTAL LIFETIME COST SOLUTIONS Efficient, easy to maintain & long life design.

Flux Brushless Mains Powered Barrel Pump

Chemical Pump & Grease Pump

Flux Brushless Mains Powered Barrel Pump
Flow Rate 12 - 60L/min
Max Head (pressure) Up to 8.5m
Max Temperature 40°C
Immersion Lengths 500, 700, 1000mm


Flow Rate 12 - 60L/min
Max Head (pressure) Up to 8.5m
Max Temperature 40°C
Immersion Lengths 500, 700, 1000mm

The Flux FP314 Brushless Mains Powered Barrel Pump is designed to transfer small quantities of fluid and has the ability to pump out of narrow-necked containers which can sometimes be problematic.

Operation of this Flux pump is via mains power, is available in 110v or 230v and therefore allows very long operating times. The motor is removable from this drum pump meaning that it can operate several pumps in series with one motor.

The FP314 barrel pumps have a seal-less feature, allowing fluids to be pumped that would normally damage a mechanical seal. The shaft is lubricated by the pumped fluid and therefore means the fluid is not going to get contaminated. This Flux pump is also lightweight and can be operated by one hand, allowing it to be removed from a drum with minimal force.

  • The motor is easily removable
  • Several pumps can be operated in series with one motor
  • Ideal for the transfer of small quantities
  • Can pump out of narrow-necked containers
  • Minimal force required to change drums
  • Hand nozzle always quickly at hand due to holding hook
  • 5 m cable with 2-pole connector
  • JUNIORFLUX F 314 PP-25/19:
  • 314 43 007 – 700mm Immersion Length
  • 314 43 010 – 1000mm Immersion Length
  • JUNIORFLUX F 314 PP-32/25:
  • 314 44 010 – 1000mm Immersion Length
  • JUNIORFLUX F 314 PP/S-32/25 with AdBlue:
  • 314 44 ZV2 – 1000mm Immersion Length
  • COMBIFLUX FP 314 PP-25/19:
  • 314 45 905 – 500mm Immersion Length
  • 314 45 905 – 500mm Immersion Length
  • 314 45 907 – 700mm Immersion Length
  • 314 45 910 – 1000mm Immersion Length
  • COMBIFLUX FP 314 PP-32/25:
  • 314 46 905 – 500mm Immersion Length
  • 314 46 907 – 700mm Immersion Length
  • 314 46 910 – 1000mm Immersion Length
  • 314 46 912 – 1200mm Immersion Length
  • COMBIFLUX FP 314 PVDF-25/19:
  • 314 65 905 – 500mm Immersion length
  • 314 65 907 – 700mm Immersion length
  • 314 65 910 – 1000mm Immersion length
  • COMBIFLUX FP 314 S-28/25:
  • 314 26 905 – 500mm Immersion Length
  • 314 26 907 – 700mm Immersion Length
  • 314 26 910 – 1000mm Immersion Length
  • 314 26 912 – 1200mm Immersion Length
  • Commutator motor FEM 3070:
  • 307 01 000 – 230V, 50Hz
  • 307 01 001 – 240v, 50Hz
  • 307 01 002 – 120v, 60Hz
  • 307 01 003 – 11v, 50-60Hz
  • 307 01 004 – 100v, 50-60Hz

The Flux COMBIFLUX FP314 Series Barrel Pumps are available with the following material options:

 PPPVDFSTAINLESS STEEL
TubesetXXX


      Castle Pumps are fully accredited to enable you to buy with confidence. Our accreditation includes:

Our accreditation