Talk to us today: +44 (0) 1773 533 283

My Enquiry List: 0 itemsView list

     

Flux F 706 Centrifugal Vertical Immersion Pump

Chemical Pump

Flux F 706 Centrifugal Vertical Immersion Pump
Flow Rate Up to 74 m3/h
Max Head Up to 33m liquid column
Max Temperature 60°C


Flow Rate Up to 74 m3/h
Max Head Up to 33m liquid column
Max Temperature 60°C

The Flux F 706 Centrifugal Vertical Immersion Pumps are typically used in the chemical industry for transferring corrosive fluids, acids and alkalis. These vertically immersed sump pumps are specifically design for stationary applications, with 4 sizes available: 135, 185, 230 and 350 to meet a diverse range of application requirements.

The vertical cantilever pumps robust construction consists of a welded pump housing to support the tube and a sleeve bearing, which is lubricated by the liquid. A large polypropylene-coated drive shaft with the use of a thick-walled support tube ensures a very smooth running of the pump.

  • Vertical centrifugal immersion pump
  • Available with a wide range of three phase motors from 0.37 to 5.5 kW, 2850 rpm, jet-proof to IP 55.
  • Slide bearing lubricated by the liquid for immersion lengths up to 2000 mm
  • Sealless Design
  • Smooth running, due to the large pump shaft with protective coating in PP
  • Rotating components never in contact with the pump housing
  • Suitable for pumping corrosive liquids at high temperatures
  • Immersion lengths: 500, 700, 1000 and 2000 mm, custom length on request.
  • Very long service life even in the case of application where a continuous use is needed
  • Connection of the pump and motor is made by flexible coupling
  • F 706 PP-135:
  • 706 41 105 – 500mm Immersion Length
  • 706 41 107 – 700mm Immersion Length
  • 706 41 110 –1000mm Immersion Length
  • F 706 PP-185:
  • 706 41 205 – 500mm Immersion Length
  • 706 41 207 – 700mm Immersion Length
  • 706 41 210 – 1000mm Immersion Length
  • F 706 PP-230:
  • 706 41 305 – 500mm Immersion Length
  • 706 41 307 – 700mm Immersion Length
  • 706 41 310 – 1000mm Immersion Length
  • F 706 PP-350:
  • 706 41 405 – 500mm Immersion Length
  • 706 41 407 – 700mm Immersion Length
  • 706 41 410 – 1000mm Immersion Length

The Flux F 706 PP Chemical Centrifugal Immersion Pumps are available with the following material options:

Polypropylene (PP)
Inner TubeX
Outer TubeX
ImpellerX

Related Products


      Castle Pumps are fully accredited to enable you to buy with confidence. Our accreditation includes:

Our accreditation