Talk to us today: +44 (0) 1773 533 283

My Enquiry List: 0 itemsView list

  • MODELS AVAILABLE FROM STOCK Shorter lead times. Your deadlines met.

  • APPLICATION EXPERIENCE YOU CAN RELY ON We'll specify the ideal solution for your process.

  • LOWER TOTAL LIFETIME COST SOLUTIONS Efficient, easy to maintain & long life design.

Refine your results by:

Update Results


From Stock
Air Operated Pumps
AODD Pumps
Barrel Pumps
Booster Sets
DIN24255/ EN733 Pumps
Borehole Pumps
Centrifugal Pumps
Flexible Impeller Pumps
Gear Pumps
Hand Pumps
Jet Pumps
Lobe Pumps
Magnetic Drive Pumps
Multistage Pumps
Peripheral Pumps
Peristaltic Pumps
Piston Pumps
Progressive Cavity Pumps
Screw Pumps
Self Priming Pumps
Side Channel Pumps
Split Casing Pumps
Submersible Pumps
Vane Pumps
Vertical Immersion Pumps
Vertical Inline Pumps


Aquaculture Pumps
ATEX Pumps
Ballast Pumps
Bilge Pumps
Biogas Pumps
Boiler Feed Pumps
Cargo Pumps
Chemical Pumps
Condensate Pumps
Cooling Pumps
Deck Wash Pumps
Dosing Pump
Dredging Pumps
Fire Fighting Pumps
Fish Waste Pumps
Food Transfer Pumps
Fuel Transfer Pumps
Fume Scrubber Pumps
Grease Pumps
Grey Water Pumps
High Viscosity Pumps
Hygienic Pumps
Irrigation Pumps
Lubricant Pumps
Marine Fuel Pumps
Pressure Booster Pumps
Reverse Osmosis Pumps
Sea Water Cooling Pumps
Sea Water Injection Pumps
Sea Water Service Pumps
Sewage Pumps
Sludge Pumps
Swimming Pool Pumps
Thermal Oil Pumps
Waste Water Pumps
Water Circulating Pumps
Water Transfer Pumps
From Stock


From Stock
Azcue Pumps
Bombas Trief
CAT Pumps
Savino Barbera


From Stock
Cast Iron
Stainless Steel

Max. Flow Rate

From Stock
0-1M³H (For Dosing)
16M³H - 50M³H
51M³H - 100M³H
101M³H - 200M³H
201M³H - 500M³H
501M³H - 1000M³H
1001M³H - 2000M³H
2001M³H - 4000M³H


From Stock
Flooded Suction
Self Priming


From Stock


From Stock
51M - 100M
101M - 200M
201M to 300M
301M - 400M
401M - 500M
501M +


From Stock

Update Results

Sludge Pumps Page 1

Heavy duty, high pressure slurry pumps

Sludge pumps, or slurry transfer pumps as they are otherwise known, are designed for transferring viscous fluids with high solid content. Typically, the sludge transfer pump design is a positive displacement pump to enable the handling of heavy, viscous and abrasive liquids including oil sludge, bio waste, sewage, mud and lime slurry.

Heavy duty sludge pumps often contain a chopper impeller that cuts down the solids into smaller, manageable pieces to allow them to be more easily passed through. Alternatively vortex impellers are installed on abrasive slurry pumps to create a vacuum and allow solids to pass through the pump without interfering with the internals. Slurry pumps are common in mining, construction, agricultural and industrial applications where waste fluids are processed, and are often progressive cavity or peristaltic pumps.

To read our sludge transfer pump case studies, choose from the following:

Oil DrillingSubsea Oil/GasAnaerobic Digestion Plant.

Sort by:

Azcue VRX Vortex Impeller Close Coupled Centrifugal Pump

  • ​Up to 500M³H
  • Max. Head 30M
  • Max. Temp 100°C
  • DN50 - DN200 Outlet

Azcue VRX Vortex Impeller Vertical Immersion Pump

  • Up to 500M³H
  • Max. Head 30M
  • Max. Temp 100°C
  • DN50 - 200 Outlet

Azcue BTR Grinding/Cutting Vertical Immersion Pump

  • Up to 80M³H
  • Max. Head 10M
  • Max. Temp 80°C
  • DN125 Outlet

Azcue B Air Operated Diaphragm Pumps

  • ​Up to <70M³H
  • Max. Head 70 M
  • Max. Temp <90°C
  • 1” - 3” Outlet

Azcue Mud Pumps

  • Up to 1100M³H
  • Max. Head 165M
  • Max. Temp 100°C
  • 2”-10” Outlet

Boyser AMP Series Peristaltic Pump

  • Up to 1200L/hr
  • Max. Head 8 bar
  • 3/8” - 1”

Boyser FMP Series Peristaltic Pump

  • Up to 44,000L/hr
  • Max. Head 8 bar
  • 1 1/4” - 2 1/2”

Boyser RBT Series Peristaltic Pump

  • Up to 36,000L/hr
  • Max. Head 15 bar
  • 1” - 4”

HCP AG Series Submersible Pump

  • Up to 120M³H
  • Max. Head 30M
  • Max. Temp 40°C
  • 80 - 150 mm Outlet
  • 10 mm Free Passage

HCP IC Series Submersible Pump

  • Up to 120M³H
  • Max. Head 38M
  • Max. Temp 40°C
  • 50 - 150 mm Outlet
  • 10 mm Free Passage

HCP AFG Series Submersible Pump

  • Up to 150M³H
  • Max. Head 21M
  • Max. Temp 40°C
  • 100 - 150 mm Outlet
  • 54 mm Free Passage

Tsurumi KTV2/KRS2 Series Submersible Pump

  • Up to 192M³H
  • Max. Head 23M
  • Max. Temp 40°C
  • 50 - 150 mm Outlet
  • 30 mm Free Passage

17 Results


If you are unable to find the product that you are looking for then please contact us via or +44 (0) 1773 533 283


      Castle Pumps are fully accredited to enable you to buy with confidence. Our accreditation includes:

Our accreditation