Talk to us today: +44 (0) 1773 533 283

My Enquiry List: 0 itemsView list


Dewatering Contractor

Customer: Dewatering Contractor

Location: Nigeria

Equipment supplied

2 x Trolley Mounted Diesel Driven Self-Priming Centrifugal Pumps

  • Application: Pond Dewatering Pump
  • Fluid: Pond water containing silt
  • Flow: 150m³/hr
  • Total head: 100m Horizontal + 10m Vertical
  • Power: 11Kw
  • RPM: 2500
  • Execution: Horizontal
  • Pump casing: Cast Iron
  • Impeller: Cast Iron
  • Shaft: Stainless steel
  • Coupled to 12LD477 / LOMBARDINI / 2 / 954 diesel engine
  • Electric start with battery included


Castle Pumps were approached by a dewatering contractor in Nigeria who required dewatering pumps for a pond in a remote location. The customer did not have access to a mains power supply and therefore required the pumps to be diesel driven.

The pond contained 600m³ of water and the customer wanted this emptied in around 6 hours. The dewatering pumps were required to be self-priming and able to handle silt. Due to the remote location, they wanted to purchase two pumps to ensure there was a backup in the event of a failure.


We have access to a range of high quality and reliable trolley mounted diesel driven centrifugal pumps. The trolley ensures that the pump system is completely mobile and the customer can move it around the site with ease.

We selected 4” pumps that could handle up to 45mm solids; the customer was using a strainer so we knew this would be sufficient. These dewatering pumps are capable of supplying 150m³/hr at the required head, which ensures that the pond is emptied in the required time of 6 hours. The centrifugal water pumps are coupled to 11Kw Lombardini engines to maintain reliability.

      Castle Pumps are fully accredited to enable you to buy with confidence. Our accreditation includes:

Our accreditation