Customer: Offshore Wind Turbine Installer
1 x Stainless Steel Barrel Pump
Flux F550GS Range
- Application: Grease pump
- Tube set: 700MM
- Body: Stainless Steel 316ti
- Shaft: Stainless Steel 316ti
- Seal: Ceramic Oxide
- O Rings: FKM
- O/D of Pump: 50 mm
- Outlet: 1.5" BSP Male Parallel
- Stator: 50/21 NBR, BLACK
- Petroleum hose: DN32 (5 metres)
- Swaged fitting: DN32-G 1 ½” - To connect hose to pump outlet
- Motor: F458 110v 50HZ TEFC
An offshore wind turbine installer contacted us with an enquiry for a mobile pump to transfer medium viscosity grease from 25 litre pails. This grease pump would be used on board a ship and therefore the materials needed to be resistant to corrosion.
To meet the customer requirements, we supplied a progressive cavity electric drum pump that could handle medium viscosity fluids. To ensure that the grease pump would not corrode in a marine environment, the pump was specified to come with a stainless steel tube set. We supplied the complete package including barrel pump, motor, hose and connections. This ensured that the pump was ready to be used as soon as it arrived.
The Flux drums pumps we supply are of the highest quality and extremely reliable. We had great confidence in selecting this pump as we know that pumps on board ship need to be robust and reliable to deal with the heavy duty demand.
You can download this case study by clicking on the image below...