Need advice on the right pump for your application? Call the team on 01773 533 283.

Talk to us today: +44 (0) 1773 533 283

My Enquiry List: 0 itemsView list

     
  • Fast track icon

    MODELS AVAILABLE FROM STOCK Shorter lead times. Your deadlines met.

  • lightbulb icon

    APPLICATION EXPERIENCE YOU CAN RELY ON We'll specify the ideal solution for your process.

  • Piggy Bank Image Icon

    LOWER TOTAL LIFETIME COST SOLUTIONS Efficient, easy to maintain & long life design.

Tsurumi LSC Series Submersible Pump

Waste Water Pump

Tsurumi LSC Series Submersible Pump
Tsurumi LSC Series Submersible Pump
Tsurumi LSC Series Submersible Pump
Flow Rate Up to 10.2m³h
Max Head (Pressure) Up to 11m
Outlet Sizes 25-50mm
Max Temperature 40°C
Free Passage 6mm


Flow Rate Up to 10.2m³h
Max Head (Pressure) Up to 11m
Outlet Sizes 25-50mm
Max Temperature 40°C
Free Passage 6mm

The Tsurumi LSC Series Submersible Water Pump is a Puddle Sucker pump. The Tsurumi puddle sucker will pump down to 1mm making it an excellent choice for water on flat surfaces. The waste water pumps feature a dual position outlet port enabling the hose to be positioned vertically or horizontally avoiding kinks. The LSC series sump pumps feature an integral swing check valve to prevent back flow of water from the discharge hose. The submersible pumps are able to operate for an extended period of time with little or no water thanks to an oil lifter and a water and air cooling channel on the top outlet.

The Tsurumi LSC series is primarily for pumping large or small areas of nuisance water from flat surfaces and used by hire companies, utilities and flood control companies.

  • Site drainage, nuisance water, cleaning water, water on floor and puddles which can pump down to 1mm
  • Available in manual and automatic versions.
  • Durable and robust. Pressed steel outer casing, cast aluminium pump stand, steel and rubber base plate, rubber pump chamber and urethane semi-vortex impeller with free passage up to 6mm.
  • AISI 403 Stainless Steel Shaft
  • Integral swing check valve.
  • Silicon carbide double mechanical seal in an oil chamber, oil lifter.
  • Dual position outlet port, hose coupling, water and air channel and
  • 10 metres of heavy duty power cable.
  • Switch H20 models are recommended for more precise water level control. 3 probes, in stainless steel set in an epoxy resin filled holder represent on, off and common.
  • The automatic LSC1.4S c/w SwitchH2O & control panel versions are supplied with 10 metres of low voltage PVC power cable and should be used with a QA50B control panel.
  • Single phase 110V / 230V 50Hz motors.
  • LSC1.4S – 25mm outlet, 170 L/min, 11M max head, 0.48kw motor 110V / 230V 50hz
  • LSC1.4S – 50mm outlet, 170 L/min, 11M max head, 0.48kw motor 110V / 230V 50hz
  • LSC1.4S – 25mm outlet, 170 L/min, 11M max head. Automatic with Sensor+E electronic float switch, 0.48kw motor 110V / 230V 50hz
  • LSC1.4S – 25mm outlet, 170 L/min, 11M max head. Automatic with Sensor+E electronic float switch, 0.48kw motor 110V / 230V 50hz
  • LSC1.4S – 25mm outlet, 170 L/min, 11M max head. Automatic with SwitchH2O and control panel, 0.48kw motor 110V / 230V 50hz
  • LSC1.4S – 50mm outlet, 170 L/min, 11M max head. Automatic with SwitchH2O and control panel, 0.48kw motor 110V / 230V 50hz
URETHANE RUBBERETHYLENE PROPYLENE RUBBERSTAINLESS STEEL EN-X6Cr13
CASINGX
IMPELLERX
SHAFTX

Castle Pumps are fully accredited to enable you to buy with confidence. Our accreditation includes: Our accreditation A division of the CTS Group, Part of Flow Max Ltd.