MODELS AVAILABLE FROM STOCK Shorter lead times. Your deadlines met.
APPLICATION EXPERIENCE YOU CAN RELY ON We'll specify the ideal solution for your process.
LOWER TOTAL LIFETIME COST SOLUTIONS Efficient, easy to maintain & long life design.
| Flow Rate | <5000M³H |
| Max Head (pressure) | Up to 150 M |
| Max Temperature | <120°C |
| Outlet Sizes | 25-250 |
| Flow Rate | <5000M³H |
| Max Head (pressure) | Up to 150 M |
| Max Temperature | <120°C |
| Outlet Sizes | 25-250 |
Azcue Pumps offer bulkhead penetrations of different sizes for hydraulic, electric and engine driven pumps. The pump is mounted in a hazardous area or within a liquid which can be seawater, or a flammable liquid such as methanol, whilst the motor or other drive is situated in a safe area connecting the pump head via a drive shaft through the bulkhead. The bulkhead is sealed with an impenetrable seal preventing any fluid or gas escape. This pump may be used where there is limited space available, or where a motor would preferably be located outside of a hazardous area.
Material Options:
| CAST IRON GG25 | BRONZE G-Cusn5ZnPb (Rg5) | BRONZE G-CusN10 | BRONZE G-CUA110Ni | BRONZE G-CuSN10Zn (Rg10) | BRONZE G-CuSn10Pb10 | STAINLESS STEEL AISI 316 X5CrNiMO 18 10 | STAINLESS STEEL AISI 420 X20Cr13 | |
| VOLUTE | X | X | X | X | X | |||
| IMPELLER | X | X | X | X | X | |||
| SHAFT | X | X | ||||||
| WEAR RINGS | X | X | X |
Castle Pumps are fully accredited to enable you to buy with confidence. Our accreditation includes:
A division of the CTS Group, Part of Flow Max Ltd.
