Case Studies

This pipeline pig manufacturer was hiring diesel driven pumps every time outdoor testing was taking place, but found that the hired pumps were noisy and inaccurate. They therefore wanted to purchase their own pump which would produce 80 l/sec at 8-10 bar, which was capable of 3-10 minute cycles, 6-10 times a day, with a maximum current of 158 A.

When a customer enquires about a pumping system, there is usually a list of specifications that need to be met. Thanks to our team's knowledge and experience, Castle Pumps were able to fulfill our customer's exact requirements. We designed, built and supplied a ready to use system, which cut the customers extraction process time to under two hours.

Here at Castle Pumps we are able to source specific pumping components to produce the most bespoke of pumping systems. This customer was having trouble finding a supplier which was capable of designing and supplying a system to fit their requirements, until they came to us. We were able to design, build and supply a ready to use solution which matched their specifications.

Castle Pumps investigate all aspects of a customers requirements when specifying a pump, as it's essential to select the right pump for their needs. This case study shows that the customers requirements required further investigation in order for us to decide which pump would be best suitable for their requirements.

Castle Pumps have established a network of manufacturers that they can rely on when they require bespoke or tailored pumping solutions. The customer in this case study required a replacement pump that could be directly installed into existing pipework. Castle Pumps were able to get a pump specially manufactured to match the dimensions of the existing pump, therefore eliminating the need to adapt the installation.

Castle Pumps understand that for some companies the lead time on wearing parts is one of the most important factors, and therefore ensuring access to local stock is vital. In this example, we were able to improve on the previous supplier's lead time on spare parts by three weeks. As pump downtime for a dredging company is very costly, the customer was hugely impressed with our service.

One of the UK's largest home fragrance manufacturers enquired about a pump for transferring wax at 60°C, which could do a number of batches within a set time frame. Due to prior experience, we knew which pump would be the best solution for their specific requirements and were able to supply an industrial peristaltic pump, that was low maintenance and relatively low cost.

A wood and laminate flooring company in the UK needed to gravity feed an adhesive from an IBC to a piece of machinery in their product line, in order to apply the solution in a particular way to their products. One of the main factors we had to consider was the thickness of the fluid - with a viscosity of 4000-5000 cP, we selected a gear pump which we knew could handle this type of fluid. Furthermore, by selecting a gear pump we were also able to achieve the low flow rate that the customer required.

A Nuclear Laboratory in the UK required a portable magnetic drive pump for transferring Zinc Bromide from IBC’s into radiation screens. The pump needed to be lightweight, fitted to a carry frame and have a single phase 110V motor. Castle Pumps has access to a high quality range of portable chemical transfer pumps and were therefore able to supply the customer with the required pump.

The Royal Veterinary College contacted us with a unique enquiry. They needed an ATEX rated hand pump for transferring -20°C acetone, which would be used to freeze animal carcasses in their laboratory. The college sent photos of the drum along with the dimensions, to ensure the tubeset was cut to the correct length. We supplied them with their required pump, as well as a discharge hose and nozzle so the customer had easier operation.

An engineering company who were refurbishing a leisure yacht needed pumps for the sewage and oily waste water tanks, but were having trouble sourcing surface mounted self-priming pumps that would fit into the allocated space, that would perform the required duties. Castle Pumps came up with a solution and provided them with a unique range of progressive cavity pumps that matched their requirements and delivered them to the engineers in just over four weeks.

This generator manufacturer customer needed a pump set for transferring fuel in bulk with a lift height of 26.5 meters and total pipe length of 80 meters. We were able to select 2 of our gear pumps which were ideal for the requirements this customer was after.